Sealcoating is the best way to protect your asphalt driveway or parking lot from UV damage, water penetration, oil stains, and oxidation. Harrison Paving applies two coats of commercial-grade emulsion sealer using professional spray equipment calibrated for consistent, even coverage. This extends your pavement's life significantly and gives it a rich, dark black appearance that dramatically improves curb appeal.
Professional sealcoating begins with thorough surface cleaning to remove dirt, debris, and organic growth. We fill all visible cracks with hot rubberized crack filler — this step is essential because sealcoat alone cannot bridge open cracks. Oil stains are treated with special primer to ensure proper adhesion. Then we apply two coats of commercial-grade sealer, providing roughly twice the protection of a single coat. We provide barricades to keep vehicles off the fresh surface during the 24 to 48 hour curing period.
We schedule sealcoating between May and September when temperatures are consistently above 50 degrees and no rain is forecast for 24 hours. We recommend first sealcoating approximately 12 to 18 months after new installation, then repeating every 2 to 3 years for optimal protection. The cost of sealcoating is a fraction of what driveway replacement costs — it is one of the most cost-effective property maintenance investments you can make. Call (856) 694-4181 to schedule your sealcoating.
Contact Harrison Paving at (856) 694-4181 for a free estimate.